Cable Matters 100-Pack Cat 6 Pass Through RJ45 Connectors, 50µ Gold Plated (Cat 6 Ends / Cat6 Connector /RJ45 Modular Plugs/Ethernet Plugs/Network Connector) for Solid or Stranded UTP Ethernet Cable

I keep buying these are they are a good value and for the money, pass through is a game changer in time savings. I like the quality of these connectors and they making cabling a bit easier for installing your cables. Never worry is a cable doesn't match the same length as the other 7 out of 8, or worry one got flipped. You can easily verify on the other side, and simply crimp and cut at the same time with a great quality crimper.

These work amazingly well and are easy to use.Just get the right order, push the wires all the way through, cut off the end of the wires then pull back and crimp.

These ends are intended to be used with crimpers that cut off the wires that pass through the end. I have found these very easy to use and have not had any of the reported issues of not making a good connections. Far easier that the traditional ends where you need to know how long to cut the wires before crimping. I am using the Klein Tools VDV226-110 Wire Crimper with these ends. A good pair of crimpers will ensure a good connection. I would not suggest trying to cut the wires off after crimping, you will run into problems. I speak from experience. The only issue I have had is with smaller gauge wires, these are designed for 24-28 gauge stranded wires and will not work on 28 gauge solid wire. While I have used these with 24 gauge solid wire without issue, I would recommend getting ends designed for solid wire if that is what you are using. Use the right tools for the job and things will work better. Don't rate a product poorly if you are using it to do something it wasn't designed for.

Easy to use pass through style RJ45 connectors. I am on my 2nd pack and have used over 100+ of them with ZERO FAILURE. They work and support POE just fine. Take your time, do it correctly and you will not have any issues. Definitely recommend, these are a great value for the price.

If you're planning on wiring your home or workspace with Ethernet, these Pass Through RJ45 Connectors are a solid choice. I recently used these for a home networking project and was impressed by how easy they made the process. The pass-through design allows you to thread the wires completely through the connector before crimping, ensuring that everything is aligned perfectly. This feature is a game-changer, especially if you've struggled with traditional connectors where it's easy to misalign the wires. I paired these with a Klein Tools crimper, and every connection was almost successful on the first try.However, these connectors do have a few quirks. Some users, including myself, noticed that the outer wires don't always cut cleanly when using certain crimpers, which can be a bit annoying if you have to twist them off manually

I was worried that connectors might be low quality, but they performed as CAT6 connectors should.

They were easy to use and they worked

The trick is to make sure all the individual wires are lined up as straight as possible in order and trimmed evenly before inserting into the connector. It feels like the connector is way too hollow for all 8 leads to seat in the right spots at first, but as long as they're prepped, they slot right through and pass every time. Get yourself a proper pass-through crimper (Klein Tools VDV226-110 was my choice) and you're set. I've gone through a little over 20 connectors so far with no problems aside from sore fingers.