3MFinish Line Knifeless Tape KTS-FL2, Trial Size, Green, 3.5 mm x 10 m

My first time using this product and it worked out great. My vinyl wrap job is now complete. Also great job Amazon on the delivery time.Why did you pick this product vs others?:3M is a trustworthy brand

The stuff is amazing cuts perfect lines

Great product, works as expected

First time user installing vinyl wrap, cuts very well however it did come unstuck at some locations causing the cut to become slightly malformed. Could be I didn't press hard enough to stick it down although I was sure I did, more likely the glass/metal was too cold, my garage is not heated and outdoor temp was 48F.I would recommend this product to others just press hard to make sure it sticks.

Worked great to add a vinyl wrap accent to the hood of my car. Clean the surface to remove wax and dirt. Clay bar the surface to get it smooth and clean. Lay out your design with 3M knifeless tape. Once satisfied with the tape layout, warm with a heat gun and press it down firmly to make sure it is secure. Wipe the surface with 70% isopropyl alcohol. Next, apply the vinyl wrap. The adhesive is strong and. stays in place even in areas where I lifted the vinyl to remove wrinkles. Pull the string smoothly and keep moving until you get to the end of the tape. Much safer for your fingers and your paint than razor blades. I recommend a small practice piece beforehand with the knifeless tape and vinyl to become familiar with the process.

I made three unsuccessful attempts to do a chrome delete on my 2019 Honda Civic Hatchback, all three ending in much profanity because chrome ended up being exposed when I trimmed the vinyl too much by accident with a knife.Enter this knife-less tape which allowed me to meticulously plan where the cuts would be to make the 'overhang' the perfect amount to be tucked under the weather stripping, place the tape down, then cut it after the vinyl was on. It really saved the project as I was ready to call it quits!Pro tip - if you have a surface to which this tape has a hard time sticking, lay down some blue painters tape first and this will stick on top - not as well as it does to a window or other surfaces of the car but well enough to allow me to set up cut lines on weather stripping around the chrome portions I was 'deleting'.It was really satisfying to pull the line up and see is slice through the vinyl. Just be sure that if the sliced edges will be visible, REALLY press the vinyl down on top until you can see every detail of the tape and center line embossed before you pull the line. It didn't matter for my uses since I was tucking everything underneath but 3M also makes a 'Design Line' tape that is finer and allows more complex curves in the tape. This 'Finish Line' tape is best for straight cuts with semi-rough edges that won't be seen.Photo of the finished driver's side of the car.

Cool way to get a clean cut with vinyl. Instructions are great and neither is the website they recommend, but there’s lots of videos out there to help.

Man this stuff is genius. 10/10