Qubo Digital Tyre Inflator PRO from Hero Group | Turbo Motor with Super Fast Inflation | 150 PSI | Car 12V Port Input | Digital Display | 5 Air Fill Modes | LED Light | Multiple Nozzles | Auto Cut-Off

The media could not be loaded. I use it for inflating tyre of my Ntorq. I have set it to 35 psi. Quality seems ok. It is Plastic and Metal after all. It is bigger than my plam, but you can hold it sideways. It is not uncomfortable to hold but keep it at a surface.Pressing just one button starts filling the tyre. You can adjust psi with + and - button. Inflating from 0 to 35 takes few minutes. It has an LED array which can act as torch or emergency indicator, but it cannot be turned on without DC car socket power.It is loud but it works. It comes with long cable. It also comes with different adaptor for bicycle tyres, balls, car tyres, etc.If you don't have any 12v Car socket near you then you would need an AC to DC 12v car adaptor to power the device. Use the included QR code to understand how this works properly.

Not happy with Qubo quality, feedback mentioned below 👇🏻01) Interface is too complex and basic functions appear difficult02) No operating manual included03) Even after a struggle of 30 mins. this tyre inflator is incapable of achieving Tyre pressure not more than 10, where an average of 28 to 36 is required to run the vehicle !

After looking for several tyre inflators on amazon ,I finally found this one ,It is really good and does the job ,U can fill a tyre from 0 to 35psi in one shot after that u might have to give it a break as it heats up.A small Heads-up(*Start ur vehicle as it fills the tyre faster rather than using it on idle battery*Make sure the hose is tight on inflator end sometimes air leak at that spot ,so inflating gets late)

I recently purchased the Qubo Smart Tyre Inflator PRO for my car and I am extremely satisfied with my purchase! This inflator has exceeded my expectations in every way. With a maximum pressure of 150 PSI, it quickly and easily inflates my car and bike tyres to the precise pressure I need. The 5 air fill modes are incredibly convenient, allowing me to inflate my tyres, balls, and other inflatables with ease.Additionally, the LED light is a fantastic feature, illuminating my tyre valves in low-light conditions and making it easy to operate the inflator at night. The multiple modes are also great for customizing the inflator to your needs.What I appreciate the most about this product is the trust of Hero Group behind it. I know that this inflator has been designed and manufactured to the highest quality standards, ensuring that it will provide reliable performance for years to come.Overall, I would highly recommend the Qubo Smart Tyre Inflator PRO to anyone in need of a high-quality, versatile, and reliable tyre inflator. It is an excellent investment that will save you time, money, and hassle in the long run.

I have one AmazonBasic Tyre inflator that I use for my other car and this one is clearly superior because of below points:- This has metal piston so it’s more durable than plastic piston- In built storage for all the attachments and pipe- Push type nozzle so it doesn’t reduce air pressure when removing the hose.- Air release feature which is unique to this one only- Good display with illumination so it’s not a problem in the dark- Detachable cord, so if you want to replace it or increase the length or use AC Adapter at home then It’s possible.- LED lights instead of a bulb- SOS feature- It’s very compact and can be put anywhere, I keep it in my door bin.Things that can be improved:- There should be some kind of feet on any side so the pump can stay on the ground- Plastic on both side can be scratched if we put directly on the floor because there’s no raised feet- There’s no spare fuse given like other pumps, Not sure if those are needed.- Not sure about after sales support as Qubo is quite new to this product.

Pros: fills up pretty fast. Control buttons are easy to operate. Cord length is decent. Can reach all tires while connected to the power socket in the dashboard.Cons: the tube length is less. So if your tire nozzle is on the top, the device cannot rest on the floor. Another issue is with connecting and disconnecting the device. Let's out a lot of air from the tires. If the recommended rating for the tire is 35, you need to fill for 36 or 37

Been using it for a few months now and it's fast enough to inflate. It takes about a minute at Max to inflate the tyres from 30 to 34 psi. Took about 3 minutes to pump from 19 to 34psi (with the tyre having a puncture).It's easy to use but requires a little practice of attaching the nozzles to the valve.

Tried using this product for 5 days and it is a poorly designed cheap product and is not worth the price. I have been using tyre inflators for 5 years and you can get a better product for half the price. 🤦‍♂️ #NotWorthIt #BuyerBeware- The notch that fits to the tyre mouth is poorly designed. In the effort to fit it properly you will end up damaging the tyre mouth. 😡- Device calibration sucks. If you set the tyre pressure of 35psi. It cuts off at 34psi. You can find some jugaad to get the right pressure. But for this price point you would expect the device to give you the correct pressure. 🤬 #FaultyProduct- If you are trying to fill pressure on a suv the inflator hangs from the nozzle pulling the tyre mouth. 😱- I am unable to return it as the product has a replacement warranty and not return. 😤 #NoReturns- DO NOT WASTE YOUR MONEY ON THIS PRODUCT. ❌ #AvoidAtAllCosts